But what I can tell you is that it’s normally between 2-3 days. Here are some of the contributing factors to the tint curing duration…
We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.
The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It’s the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.
It’s common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat.
Even after a professional window tint, you may see a few tiny bubbles under the film and a haze on the glass. Streaks, haze, and bubbles are a normal part of the window tint drying process, so don’t worry! Bubbles can occur as moisture forms between the window and the film, but they will evaporate within a few days.
And, as the tint is on the inside of your car’s windows and not the outside, and the windows are closed, the rain can’t get into your car and it won’t mess up your new tint. Tinting is, providing you do as you’re instructed, completely rainproof.
A 5% tint is extremely dark, and you can’t see through it at all. This is actually illegal in most states but is most commonly used on the back windows of limousines.
Metalized window tints help reduce heat by reflecting it away from your car. … By reflecting the sun’s rays, metalized window tinting can reduce glare and block harmful UV rays. Not only does a metalized window tint reduce heat, but it also strengthens the windshield.
With traditional installations, this is completely normal and temporary. For the first few days after your windows are tinted they might appear cloudy, hazy, and you may see little water pockets forming underneath the film.